Calculators

Rentable area calculator

Enter usable square footage and a load factor to get rentable square footage, the common area allocation behind it, and the resulting loss factor — recalculated as you type, with no page reload.

The area your tenant occupies exclusively — from the lease or the as-built floor plan.

The percentage added to usable area for the tenant's share of common area. Unsure of this number? Use the load factor calculator if you already have RSF and USF.

Rentable square footage (RSF)—
Common area allocation—
Loss factor—
Load factor (ratio)—

This runs RSF = USF × (1 + load factor), the relationship behind every BOMA and REBNY result. It does not substitute for a full Global Summary of Areas — the exact common-area columns differ by standard edition.

How this number is built

Every BOMA or REBNY rentable area figure starts from the same shape of calculation: usable square footage, plus that tenant's share of the building's common area, equals rentable square footage. The load factor is simply that relationship expressed as a percentage — a load factor of 15% means 15% is added on top of usable area to reach rentable area.

What changes from standard to standard, and from building to building, is which spaces count as common area and how they're allocated across tenants. A full-floor tenant on a single-tenancy floor usually carries a lower load factor than a tenant on a floor shared with several others, because there's proportionally less shared corridor and lobby space per tenant. See rentable vs usable square footage for the worked examples, or a specific standard page for the rules a given BOMA or REBNY edition applies.

From a single suite to a whole portfolio

This calculator is deliberately simple — two numbers in, three numbers out — for a quick sanity check on a quoted figure. The full results behind an actual lease or appraisal have many more components: floor-by-floor usable area, the specific common area categories the applicable standard defines, and in a multi-building campus, an inter-building allocation of shared amenities. RentableArea.com produces that full set of results directly from an uploaded CAD floor plan — see from a floor plan to rentable area results.

Frequently asked questions

What is the difference between usable and rentable square footage?

Usable square footage (USF) is the area a tenant occupies exclusively. Rentable square footage (RSF) adds that tenant's share of the building's common areas — lobbies, corridors, shared restrooms and mechanical space — on top of USF. See rentable vs usable square footage for the full explanation with worked examples.

Where do I find my building's load factor?

It is usually stated in the lease, or can be worked out from the lease's own USF and RSF figures by dividing RSF by USF. If you only have RSF and USF and want the load factor itself, use the load factor calculator instead — it runs the same relationship in reverse.

Does this calculator follow one specific BOMA edition?

This calculator applies the USF-to-RSF relationship common to every BOMA edition and to REBNY: rentable area equals usable area plus a share of common area, expressed as a load factor. What counts as common area — and therefore what the load factor actually is for a given building — differs by edition. See the standards pages for the specific rules each edition applies, or create an account to classify a real floor plan and get the full standard-specific results.

Can I calculate rentable area for a whole floor or building, not just one suite?

Yes — the same formula applies whether USF is one tenant's suite, a full floor, or an entire building's usable area. RentableArea.com runs the calculation building-by-building and floor-by-floor directly from your floor plan, with inter-building allocation for shared amenities across a portfolio — see inter-building allocation.

Ready to measure a real floor plan?

This calculator checks a ratio. RentableArea.com produces the full results — floor by floor, building by building — directly from your CAD drawing.