BOMA Office 2024
A new Non-Allocated Tenant Areas category — and a re-derived building allocation formula to go with it — is the real change between the 2017 and 2024 office editions.
ANSI/BOMA Z65.1-2024 is the current edition of the office standard, replacing 2017 as the one BOMA recommends for new measurements. The core idea is unchanged — usable area plus an allocated share of common area equals rentable area — but the 2024 edition adds a category 2017 never had, and that single addition is the real story of what changed.
2024 introduces a Non-Allocated Tenant Areas classification: space measured the same way as ordinary tenant area, but deliberately excluded from the floor and building allocation steps that otherwise spread common-area markup across every tenant. Area in this column is added to Rentable Area at the very end, exactly as measured, with no allocation ratio applied to it either way.
That one change has a real, measurable effect, and it doesn't push every number in the same direction. On one reference building measured under both editions: a 500 SF tenant storage room that moved from a 2017 rentable exclusion into the new Non-Allocated column gained the full value of the reclassification — about 1,000 SF of rentable area across the building — because it stopped being excluded at all. A roof terrace that moved the other way — out of the old allocation path and into the new Non-Allocated column — lost about 107 SF, roughly 13% of its own area, because it stopped picking up the building's load-factor markup the way it would have under 2017. Same edition change, opposite effect, depending on what the space was to begin with.
| Space | Rentable area effect | Why |
|---|---|---|
| Tenant storage room, 2017 treatment | Excluded (0 rentable) | Counted as a rentable exclusion |
| Same storage room, 2024 treatment | +1,000 SF rentable | Moved to Non-Allocated Tenant Areas |
| Roof terrace, 2017 treatment | ~830 SF rentable | Received building allocation markup |
| Same roof terrace, 2024 treatment | ~723 SF rentable (−107 SF) | Non-Allocated, no markup applied |
Because Non-Allocated Tenant Areas sits outside the allocation step entirely, the Building Allocation Ratio's own formula changes shape between editions — the new column is removed from both the numerator and the denominator, not simply added as an extra row. A calculation built on the 2017 formula with a 2024 column bolted on would not reproduce a correct 2024 number.
See re-measure your building to the current standard for what this means if you're deciding whether a remeasurement is worth commissioning.
The clearest change is a new column, Non-Allocated Tenant Areas, with no 2017 equivalent: certain tenant space that is measured like ordinary tenant area but is carried straight through to Rentable Area without going through the floor or building allocation step. Space reclassified into this column is added back untouched at the end, instead of picking up a share of common-area markup the way it would have in 2017.
Not always — it depends on which specific spaces move categories in a given building. In one comparison on an identical reference building, a tenant storage room reclassified into the new Non-Allocated column gained roughly 1,000 SF of rentable area building-wide; a roof terrace that moved into the same new column but stopped receiving the building's load-factor markup lost about 107 SF (roughly 13%) for that one space. The same edition change can move different spaces in opposite directions.
No — BOMA 2024 doesn't retroactively change an existing lease's rentable area; it's the current edition for new measurements going forward. Many in-force leases still name 2017 or an earlier edition, and that's fine as long as the lease and the measured results agree on which edition applies.
Both. The Building Allocation Ratio's formula itself was adjusted to remove the new Non-Allocated Tenant Areas column from both the numerator and the denominator, so it isn't just an extra line item bolted onto the 2017 math — the allocation step was re-derived around it.
Upload a floor plan and RentableArea.com produces the area totals, load factor, and Global Summary of Areas for you — no spreadsheet to build by hand.