BOMA Gross Areas 2018

BOMA Gross Areas 2018: Gross Area 1 to 4

Four different whole-building gross area totals, for four different purposes — none of them the same thing as rentable area.

Measures to ANSI/BOMA Z65.3-2018. RentableArea.com is not affiliated with or endorsed by BOMA International.

Status: supported — implemented and verified against this standard's own published worked examples, and live today for a real building.

The 2018 BOMA gross areas standard (ANSI/BOMA Z65.3-2018) doesn't measure rentable area at all — it measures the whole building, four different ways, on one Global Summary of Areas.

Four gross areas, four purposes

Each Gross Area is a different sum of the same underlying space classification categories — floor and parking area, balconies and covered galleries, unenclosed circulation, public-use covered area, building voids, and other rooftop or connector area:

The four Gross Areas, by formula
Gross areaFormula (space categories)Typical use
Gross Area 1 — Leasing MethodC + D + EUsed for leasing comparisons
Gross Area 2 — International Comparison MethodC + D + FIPMS 1 compatible
Gross Area 3 — Volumetric MethodC + GBuilding volume-oriented
Gross Area 4 — Construction MethodC + D + E + F + G + HBroadest, cost-oriented

None of the four runs through the usable-area-plus-load-factor allocation that produces rentable area — gross area answers "how big is the whole building," not "how much of it does one tenant pay for."

A multi-building campus still gets one of the four

For a campus with more than one building, the standard's enhanced sheet reallocates shared space across buildings — but only for Gross Area 1, the Leasing Method; Gross Areas 2 through 4 have no campus-level equivalent in this standard.

See rentable vs usable square footage for how the actual leasing figure is built once you're past gross area, or all standards for the rest of the BOMA family.

Frequently asked questions

What's the difference between gross area and rentable area?

Rentable area is a leasing figure built from usable area plus an allocated share of common area. Gross area is a completely different kind of measurement — the 2018 gross areas standard defines four whole-building totals for different purposes (leasing comparison, international comparison, volume, and construction cost), none of which goes through a load-factor allocation step the way rentable area does.

Why does a building need four different gross area numbers?

Because "the whole building" means something different depending on why you're measuring it. A lender comparing buildings internationally needs a different boundary convention than a contractor pricing construction cost, which needs a different convention again from a leasing comparison. The 2018 standard defines all four on one Global Summary so the same building can report whichever figure a given purpose calls for.

Which Gross Area number is comparable to international IPMS figures?

Gross Area 2, the International Comparison Method, is the one built to be compatible with IPMS 1 reporting.

See this standard applied to your own building

Upload a floor plan and RentableArea.com produces the area totals, load factor, and Global Summary of Areas for you — no spreadsheet to build by hand.