BOMA Industrial 2019

BOMA Industrial 2019: single- and multi-occupant rentable area

One Global Summary of Areas now computes both single-occupant and multi-occupant rentable area for warehouse and industrial buildings.

Measures to ANSI/BOMA Z65.2-2019. RentableArea.com is not affiliated with or endorsed by BOMA International.

Status: supported — implemented and verified against this standard's own published worked examples, and live today for a real building.

ANSI/BOMA Z65.2-2019 measures industrial buildings — warehouse, distribution and light-manufacturing space — on one unified Global Summary of Areas, replacing the older standard's split between an Exterior Wall method and a Drip Line method.

Single-occupant and multi-occupant, on the same sheet

The 2019 edition computes a Single Occupant Rentable Area directly from Boundary Area less rentable exclusions, and a separate Multi-Occupant Rentable Area that runs the building's occupant and amenity areas through the same kind of Floor Allocation Ratio and Building Allocation Ratio used in BOMA Office, producing a load factor specific to the building. Both figures appear in the same Global Summary of Areas, so a building leased to one tenant and a building leased to several don't need two different, incompatible measurement approaches.

Illustrative Global Summary structure — figures are an example, not a real building
Area typeArea (SF)Notes
Boundary Area (IPMS 1 – Industrial)140,000Outer building footprint
Less: rentable exclusions(6,500)Docks, major vertical penetrations
Single Occupant Rentable Area133,500For a single-tenant lease
Occupant Area + Building Amenity Area128,000= Floor Usable Area
Floor/Building Allocation Ratio applied1.042Spreads service + amenity area
Multi-Occupant Rentable Area133,400For a multi-tenant lease

Always confirm which edition a lease or appraisal names before comparing figures across buildings. See rentable vs usable square footage for the underlying relationship this standard builds on.

Frequently asked questions

How is the 2019 industrial standard different from the older method?

The pre-2019 industrial standard split into two separate methods — an Exterior Wall method and a Drip Line method. The 2019 edition replaces that split with one unified Global Summary of Areas that computes both a Single Occupant Rentable Area and a Multi-Occupant Rentable Area side by side on the same sheet, so a building doesn't need two incompatible sets of results depending on how it's leased.

Is the 2019 edition the current industrial standard?

This page covers ANSI/BOMA Z65.2-2019, the edition in wide use in existing leases today; always check which edition a lease or measurement report names before comparing figures across buildings.

Does industrial measurement use a load factor the same way office does?

Structurally, yes — the 2019 standard follows the same floor/building allocation shape as BOMA Office, with its own Floor Allocation Ratio and Building Allocation Ratio producing a load factor, just applied to industrial space categories like dock area and clear-height warehouse space rather than office floor plates.

See this standard applied to your own building

Upload a floor plan and RentableArea.com produces the area totals, load factor, and Global Summary of Areas for you — no spreadsheet to build by hand.